G2M Single Phase Microprocessor
This microprocessor can function with just about all accessories that are currently on the market.
Open/Close Limit Switches: These switches stop the opening/closing. Remove two jumper wires if used.
Safety Contact: To branch a photocell or sense output from a loop detector or reversing edge. The result is a reverse of movement during closing time. Not active when opening.
Electric Lock Output: 24 volt pulsed output (12 volt if required). Two selectable times: Short Pulse (1 sec.) or Long Pulse (8 sec.).
External Light Timer, Contact Output: This output provides a N.O. pulse contact to start the activation of a light timer when opening.
Optional Plug-In Cards: RTC (Remote and Decoder Control Card) or DTC (Decoder Control Card). These cards allow for connecting digital keyboards and magnetic key readers to the panel. RTC is also a receiver card.
Flashing Light Card: Provides a flashing contact before and during opening/closing.
Traffic Light Card: Controls a red/green traffic light.
Alarm Output Card: Provides an alarm contact (N.C. and N.O.) when the gate is manually opened during standby position or when a second car tries to pass after an allowed user (if option 7 is selected).
Thermal Contact: Many motors provide an N.C. contact output when motor temperature increases to a predetermined setting. This activation stops all functions when the motor hits that high-temperature setting.
Power Output: You can connect motors until you reach a total valve of 1/2 HP.
Original site design by Ball Advertising Group, Inc. • Site maintained by Fire Nebula Web Design