500 Series Operator

The 500 Series is a residential swing gate operator. As a light-duty operator, it should be subject to no more than 60 cycles per hour. This operator is recommended for gates 12 feet long or shorter that weight less than 1,500 lbs. Opening speed is approximately 12 seconds. It slows down the last 5 to 10 degrees of the swing.

Model 500A 115 VAC Single Phase Built-in Thermal Overload
Model 500B 220 VAC Single Phase Built-in Thermal Overload
Capacitor Rating 35 UF/40 UF/10 UF
Standard Working Pressure 1,650 PSI
Maximum Working Pressure 1,750 PSI
Pump Spur Gear .50 LTR/Min.
Motor 1/6 Horsepower
Amperage Draw 4 Amps
Operator Length (with piston retracted and rear bracket and swivel joint installed) 27.72 inches
Operator Length (with piston extended and rear bracket and swivel joint installed) 35.59 inches
Operator Width 3.39 inches
Operator Height 4.33 inches (w/lock cover)
Speed to 90 Degrees 12 Seconds
Piston Stroke 200 mm (7.87 inches)
Ambient Operator Temperature Range -60 to 220 Degrees F
Hydraulic Fluid Fuchs Aceite Multi-Temp
Adjustable Pressure Setting in Both Open and Closed Directions
Shipping Weight 26 lbs.

Hydraulic locks in both the open and closed positions. For gates 12 feet in length, electric locks are recommended.

In some states and cities (in case of a power outage), the gate must be able to be pushed open by the fire ore emergency vehicle. We can take out the hydraulic check valve in the closed position. You must then use an electric lock to keep the gate closed.

With the operator mounted inside the property, the operator can be installed to swing inward or outward. Most mechanical operators must be mounted on the side the gate will swing toward.


5-Year Warranty Information:: ::Customer Acknowledgment

Download Installation Manual PDF:: ::Download Information Sheet PDF

PDF documents require Adobe Acrobat Reader, a free program. Click here to download.

Original site design by Ball Advertising Group, Inc. • Site maintained by Fire Nebula Web Design